Liquid Colour Antique Old Yellow

From 13,00 €

Antique Old Yellow is part of our Special Colour Mixes; vivid, highly concentrated products, easily diluted into alcohol varnishes. You can tune them together to personalise the hue.

Before use, we highly recommend testing on scrap pieces of the instrument’s wood to predict the colour tone achieved in each case.

Warning

Format

Clear

Classification and Security

Classification:

H332 Acute Tox. 4: Acute inhalation toxicity, Category 4
H411 Aquatic Chronic 2: Hazardous to the aquatic environment, long-term hazard, Category 2
H319 Eye Irrit. 2: Eye irritation, Category 2
H317 Skin Sens. 1B: Sensitisation, skin, Category 1B
H373 STOT RE 2: Specific target organ toxicity — Repeated exposure, Hazard Category 2
H336 STOT SE 3: Specific toxicity causing drowsiness and dizziness, single exposure, Category 3

Hazard statements:

H332 Acute Tox. 4: Harmful if inhaled.
H411 Aquatic Chronic 2: Toxic to aquatic life with long lasting effects.
H319 Eye Irrit. 2: Causes serious eye irritation.
H317 Skin Sens. 1B: May cause an allergic skin reaction.
H373 STOT RE 2: May cause damage to organs through prolonged or repeated exposure.
H336 STOT SE 3: May cause drowsiness or dizziness.

Precautionary statements:

P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P264: Wash thoroughly after handling.
P280: Wear protective gloves/face protection/protective clothing/respiratory protection/protective footwear.
P302+P352: IF ON SKIN: Wash with plenty of water.
P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing.
P501: Dispose of the contents/containers in accordance with the current legislation on waste treatment.

Safety Data Sheet

The customer is responsible for reading the product’s Safety Data Sheet and fully understanding the risks and safety measures associated with its use. Proper knowledge of the products you handle is essential for ensuring safe and responsible usage.

16161 (EN) Antique Old Yellow (V1)

Application Guidelines

These are short, general indications. For more detailed instructions, please download the Technical Data Sheet available for this product.

Alcohol colours must be mixed with an alcohol varnish (Shellac, spirit varnish) to be applied. They should not be used alone as they do not form a film. Mixing them is easy and provides an optimal, long-lasting finish. They can also be combined to personalise the hue.

Their high colouring power must be considered before varnishing, and we highly recommend testing the colours before varnishing the instrument. A guide dosage value is in the Technical Data File.

The drying time depends on the varnish used. Once the varnish is widespread, let it dry for several hours until the film feels dry and not sticky. The total dryness of each layer of varnish is essential to guarantee good-quality and long-lasting film.

Caution: It is not recommended to expose the instrument directly to sunlight or UV light after varnishing. The tones and intensity of the colours could be affected.

Security and Storage

Security

According to the CLP Regulation nº1272/2008 (CLP), these products are classified as hazardous.

They are non-flammable products, but they may be classified as hazardous to health and the environment. Keep them away from drain surfaces and groundwater.

Storage

Keep the bottle tightly closed in a fresh area. Sources of heat, radiation, electricity and contact with food should be avoided. Under these conditions, the product is stable for over two years.