Application Guidelines
These are short, general indications. For more detailed instructions, please download the Technical Data Sheet available for this product.
The two components, A and B, can be applied using a sponge, ensuring even application for uniform product penetration across the surface. In the case of spruce wood, penetration is faster, so it is advisable to squeeze out the sponge well before applying it to the wood to avoid uneven penetration of the product.
Component A is used first and should be allowed to dry under UV light for 1-2 hours. Once removed from UV light, it should be allowed to air dry for an additional 2 hours before applying the following product.
Once this first coat has dried, component B is applied similarly.
This product provides protective components that prevent subsequent degradation of the wood colour and unifies the colour hues of the front and back parts of the instrument. Allow it to air dry for 3-4 hours.
Once dry, it is recommended to rub the wood with a clean cloth to remove any raised grain caused by the water-based products.