Application Guidelines
These are short, general indications. For more detailed instructions, please download the Technical Data Sheet available for this product.
Dissolve 2-3 gr of Technical Gelatin in 100 ml of warm water (40-45 ºC) and stir until blended. The solution must be fresh for use.
Apply using a sponge or brush. Spread the product evenly on the surface for varnishing.
Special drying conditions are not needed. A hairdryer can be used to accelerate the process. Before applying a second layer, rub the surface with a clean linen cloth to make it softer.
When the last layer is totally dry, rub again with the cloth. A shiny film will appear on the wood if an excess product exists. Clean this area again with a wet cloth and let it dry.